Call 08047636414 82% Response Rate

Send Email

Electronic Design & Automation Software Division

Electronic design automation (EDA) software systems are used to design and develop electronic systems such as printed circuit boards (PCBs) and integrated circuits (ICs). EDA software helps electrical engineers to create and modify diagrams and layouts including 2D and 3D models. EDA is also known as electrical computer-aided design (ECAD).

Proteus VSM Software

The Proteus Design Suite combines ease of use with a powerful feature set to enable the rapid design, test and layout of professional printed circuit boards.

ASIC DESIGN

CMOS designers have been integrating a wide variety of functionality into large ICs for many years. Everyone has seen the incredible impact of Moore's law on performance and cost in everyday life.

 

Our tools help you to realize your designs..

MICROWIND

The MICROWIND software allows the designer to simulate and design an integrated circuit at physical description level. Microwind3 unifies schematic entry, pattern based simulator, SPICE extraction of schematic, Verilog extractor, layout compilation, on layout mix-signal circuit simulation, cross sectional & 3D viewer, netlist extraction, BSIM4 tutorial on MOS devices and sign-off correlation to deliver unmatched design performance and designer productivity.

SYSTEMCRAFTER SC

SystemCrafter SC is software tool that synthesizes SystemC automatically to VHDL/Verilog description hardware. Engineers and programmers can design, debug and simulate hardware and systems using their existing C++ development environment. SystemCrafter SC facilitates to simulate hardware and software in same framework. Designers can synthesize SystemC to RTL for implementation using a standard VHDL/Verilog design flow. SystemCrafter SC also writes a structural SystemC description of the synthesized circuit for verification.

MENTORDSP

MentorDSP is an easy to use, interactive software tool cum comprehensive learning resource for various signal processing techniques, DSP functions, communication methods, statistical analysis, speech synthesis, and Image processing. The software includes real-time features such as sound processing, image capture and interface with a specific DSP hardware platform. It is simple, intuitive and straightforward to use, targeted to students in the field of digital signal processing.

PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine
  • PCB and Antenna Prototyping Machine

PCB and Antenna Prototyping Machine

Product Price: Rs 4.5 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Machine MaterialMild Steel
Usage/ApplicationPCB and Antenna Prototyping Machine
Power Rating230 V
BrandTechnosys
DesignCustomized
Model Name/NumberTS PCB 300W
PhaseSingle Phase
MaterialFR4, Copper clad, Acrylic, Metal, Aluminum and etc.
Power Source230V AC
Voltage230V
Working Area (X/Y/Z)(mm)220x330x120 mm
Resolution (X/Y)0.3125 Micro Meter [0.0127 mill]
SoftwareCopper CAM & Mach3 Mill
PCB Prototyping & Antenna fabrication SystemManual
Main Axle Rotating Speed25000 RPM
Country of OriginMade in India
Product DetailsIndustrial Standared High Accurate PCB and Antenna Prototyping Machine Series with Manual and Automatic tool Change Options

High Accuracy

  • High Strength

  • Good Quality

  • Fine Finish

PCB Prototyping Station Complete Package:

A Complete Design and Implementation solution from concept to prototype PCB Prototyping CNC machine with Fully compatible PC computer Hardware with OS with monitor. Printed circuit board prototyping machine, it can be controlled using standard G Code commands. Along with using Gerber to GCode converter software for the best possible experience.  The machine should accept various operation specific heads: spindle, solder paste syringe or pick-and-place head.


Features

Specification

PCB Prototyping System

PCB Prototyping Standard Kit

Software

Copper CAM and Mach3 Mill

Accessories

Handheld Remote Control unit for Machine Setting

Resolution (X/Y)

3.125 Micro Meter (0.123 Mil)

Working Area (X/Y/Z) (mm)

220x330x120

Minimum Width Line & Space in  mm

0.1mm (4 mil) & 0.15mm (6 mil)

Max Travel Speed (mm/sec)

58 (2.28 “)

Drilling (mm)

0.2 -3.175 (8-125 mil)

Maximum Drilling Cycles/ Min

50

Conversion Software

Converts Gerber, G code

Positioning Camera

Available

Main Axle Power Rate

300 W

Main Axle Rotating Speed

25000 RPM

Max working speed

3500mm/min

Feeding Height

120 mm

Working drive

0.02-0.05mm

Repositioning accuracy

0.01-0.02mm

Capability of Processing various materials

FR4, Copper clad, Acrylic, Metal, Aluminum and etc.,

Power

220 V AC

Weight

52 Kg


Get Best QuoteRequest A Callback
Surface Mount Technology

Surface Mount Technology

Get Latest Price

Product Details:
Type Of TechnologyCAD / CAM
Usage/Applicationindustrial, medical, automotive, military and telecommunications equipment
Type Of Service ProviderDistributor
Model/TypeSMTMATE 280
Motion Drive SystemPanasonic servo motor
MotorPanasonic servo motor
Mount Components0603, 0805, 1206, SOT, SOP, etc
NozzleJuki nozzle
Number Of Feeders27, depends on models
Visual Cameraavailable on higher model, 2 HD CCD Camera
Z Axis Maximum Moving Range410 x 490 mm
Surface Mount Technology (SMT) component placement systems, commonly called pick-and-place machines, are robotics machines which are used to place surface-mount devices(SMDs) onto a printed circuit board(PCB). They are used for the high precious placing of a broad range of electronic components like capacitors, resistors, integrated circuits onto the PCBs which are in turn used in computer, consumer electronics as well as industrial, medical, automotive, military and telecommunications equipment.
Get Best QuoteRequest A Callback
Electronic Design & Automation Lab

Electronic Design & Automation Lab

Get Latest Price

Product Details:
UsageLaboratory
Frequency25Hz to 800Hz
TypeAutomation LAB
The Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design and test analog and digital circuits of all types. Built around a large solderless breadboard, the EE board includes oscilloscopes, waveform generators, power supplies, voltmeters, reference voltage generators, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires. The EE board is powered by the free, PC-based WaveForms™ software that makes it easy to acquire, store, analyze, produce and reuse analog and digital signals. WaveForms™ runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time. WaveForms™ data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student lab/project reports can be completed using standard office tools, and submitted electronically.
Get Best QuoteRequest A Callback
Proteus VSM - Embedded Design Simulation Software
  • Proteus VSM - Embedded Design Simulation Software
  • Proteus VSM - Embedded Design Simulation Software
  • Proteus VSM - Embedded Design Simulation Software
  • Proteus VSM - Embedded Design Simulation Software

Proteus VSM - Embedded Design Simulation Software

Get Latest Price

Product Brochure

Product Details:
Operating SystemsWindows
Web Camera TypeWall Mount
Software VersionProteus Version 8.6 PROTEUS VSM read more..

Proteus VSM brings Agile development into the embedded workflow. It enables rapid prototyping of both hardware design and firmware design in software, making it easy to make changes to both.Design, Test and Debug your embedded projects before a physical prototype is ordered.circuit simulation, animated components and microprocessor models to facilitate co-simulation of complete microcontroller based designs. For the first time ever, it is possible to develop and test such designs before a physical prototype is constructed.This is possible because you can interact with the design using on screen indicators such as LED and LCD displays and actuators such as switches and buttons. The simulation takes place in real time (or near enough to it): a 300 MHz Pentium II can simulate a basic 8051 system clocking at over 12MHz. Proteus VSM also provides extensive debugging facilities including breakpoints, single stepping and variable display for both assembly code and high level language source. The VSM architecture allows additional animated models to be created by anyone, including end users. Whilst many types of animated model can be produced without resort to coding, a documented interface has been provided for developers to write their own models packaged as Windows DLLs. These models can implement purely electrical behaviour or combine this with graphical behaviour so that almost any kind of application specific peripheral can be simulated.

Schematic Entry
Proteus VSM uses our proven Schematic Capture software to provide the environment for design entry and development. ISIS is a long established product and combines ease of use with powerful editing tools. It is capable of supporting schematic capture for both simulation and PCB design. Designs entered in to Proteus VSM for testing can be netlisted for PCB layout either with our own PCB Design products or with third party PCB layout tools. ISIS also provides a very high degree of control over the drawing appearance, in terms of line widths, fill styles, fonts, etc. These capabilities are used to the full in providing the graphics necessary for circuit animation.

Circuit Simulation
At the heart of Proteus VSM is ProSPICE. This is an established product that combines uses a SPICE3f5 analogue simulator kernel with a fast event-driven digital simulator to provide seamless mixed-mode simulation. The use of a SPICE kernel lets you utilise any of the numerous manufacturer-supplied SPICE models now available and around 6000 of these are included with the package.

Co-Simulation of Microcontroller Software
The most exciting and important feature of Proteus VSM is its ability to simulate the interaction between software running on a microcontroller and any analog or digital electronics connected to it.

Source Level Debugging
Whilst Proteus VSM is already unique in its capability to run near real time simulations of complete micro-controller systems, its real power comes from its ability to perform these simulations in single step mode. This works just like your favourite software debugger, except that as you single step the code, you can observe the effect on the entire design - including all the electronics external to the microcontroller.

Model Library
In addition to the microprocessor models for each supported family, each Proteus VSM package includes a library of over 6000 device models.

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Technosys Systems. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.