Testing, Measuring And Instrumentation

WiFiScope advantages
Wireless measurements using WiFi and built-in battery with UPS functionality (uninterruptable power supply)
Mobile measurements are possible, e.g. on transport systems or moving installations 
Network and internet measurements are available for long distance measurements 
Continuous live streaming measurements over WiFi, network, internet and USB 
Galvanic isolated measurements, no physical connection to the PC required 
Differential or single-ended inputs 
USB measurements for stand-alone applications and real time high speed transient recording up to 200 MSa/s 
Easy WiFi setup, connect to an existing WiFi network in a few clicks 
Auto discovery, no need to enter IP addresses 
SDK with many examples for easily integrating the WiFiScope in other applications

WiFi connection, wired LAN connection and SuperSpeed USB 3.0 connection
 Battery powered for hours of fully galvanically isolated measuring
 1 GSamples per second sample rate WiFi oscilloscope
 14-16 bit High Resolution, 256 times more amplitude resolution than an 8 bit oscilloscope
 Lowest noise WiFi oscilloscope in the market
 DC Accuracy of 0.25 % and 0.1 % typical
 SureConnect connection test on each channel
 Extremely accurate EMI pre complicance tester with special EMI probe set
 CMI interfacing to combining multiple instruments for fully synchronized measuring
 Up to 250 MHz analog bandwidth
 Switchable hardware-based bandwidth limiter of 150 MHz, 100 MHz and 50 MHz
 Highly accurate 1 ppm timebase
 Super zoom up to 256 Million samples deep buffer memory
 Spectrum analyzer with 32 million bins
 High Performance Digital Multimeter (DMM)
 Very fast 200 MSamples per second data acquisition via USB  Protocol analyzer
 Quick Setup fast to work with all types of measurements
 I/O block to build your own measurement
 An API and SDK to build your own software
 Free software and firmware updates
 2 years warranty, 5 years optional

250 MHz bandwidth, 1 GSa/s, 256 Mpts 14 bit wireless connected differential WiFi PC oscilloscope

WiFiScope WS6 DIFF, the differential WiFi oscilloscope full of technology

Key facts of this high sensitivity best in class WiFi oscilloscope:

• WiFi connection, wired LAN connection and SuperSpeed USB 3.0 connection

• Battery powered for hours of fully galvanically isolated measuring

• 1 GSamples per second sample rate WiFi oscilloscope

• 14-16 bit High Resolution, 256 times more amplitude resolution than an 8 bit oscilloscope

• Lowest noise WiFi oscilloscope in the market

• DC Accuracy of 0.25 % and 0.1 % typical

• Differential inputs. Each input can be switched to single ended with SafeGround protection

• SureConnect connection test on each channel

• Extremely accurate EMI pre complicance tester with special EMI probe set

• CMI interfacing to combining multiple instruments for fully synchronized measuring

• Up to 250 MHz analog bandwidth

• Switchable hardware-based bandwidth limiter of 150 MHz, 100 MHz and 50 MHz

• Highly accurate 1 ppm timebase

• Super zoom up to 256 Million samples deep buffer memory

• Spectrum analyzer with 32 million bins

• High Performance Digital Multimeter (DMM)

• Very fast 200 MSamples per second data acquisition via USB

• Protocol analyzer

• Quick Setup fast to work with all types of measurements

• I/O blocks to build your own measurement

• An API and SDK to build your own software

• WiFi, 1 Gbit LAN and SuperSpeed USB 3.0 connection

• Free software and firmware updates

• 2 years warranty, 5 years optional

Keysights InfiniiVision 1000 X-Series oscilloscopes are engineered to give you quality, industry-proven technology at unbelievably low prices. Now it is easy to get professional measurements and accessible expertise at your fingertips. Don’t settle for less  and test to impress.

      50 to 100 MHz

      See more signal detail with 50,000 wfms/sec update rate

     Have confidence in your measurements with Keysight-custom technology that leverages more than 60 years of oscilloscope expertise

     Test quickly and easily with a simple, intuitive user interface and built-in help and training signals

     Get professional-level functionality with industry-leading software analysis and 6-in-1 instrument integration

• Delivery Time: 30 Days

Digital oscilloscopes, or digital storage oscilloscopes (often referred to as DSOs) input a signal and then digitize it through the use of an analog-to-digital converter. First an attenuator scales the waveform, and then a vertical amplifier provides additional scaling while passing the waveform to the analog-to-digital converter (ADC). The ADC samples and digitizes the incoming signal. It then stores this data in memory. A microprocessor system performs any additional post-processing you have specified before the signal is finally displayed on the digital oscilloscope.

Having the data in digital form enables the oscilloscope to perform a variety of measurements on the waveform. Signals can also be stored indefinitely in memory. The data can be printed or transferred to a computer via a flash drive, LAN, USB, or DVD-RW, or you can use software to control and monitor your digital oscilloscope from a computer using a virtual front panel.

More engineers are switching to Keysight oscilloscopes because they help you:

Get your products to market faster with award-winning oscilloscopes that offer the fastest update rates, the deepest memory, the industry’s only capacitive touch screen, and the most oscilloscope software options

Produce the highest-performing products with measurements you can trust thanks to oscilloscopes with industry-leading signal integrity and the largest selection of oscilloscope probes

Achieve the lowest cost of ownership with multiple instruments in one mainframe and easy upgrades

Get a compact instrument with zero compromise in functionality with the Keysight Streamline Series USB oscilloscopes

InfiniiVision 1000 X-Series Oscilloscopes

InfiniiVision 2000 X-Series Oscilloscopes

InfiniiVision 3000T X-Series Oscilloscopes

InfiniiVision 4000 X-Series Oscilloscopes

InfiniiVision 6000 X-Series Oscilloscopes

Infiniium S-Series Oscilloscopes

Infiniium MXR-Series Real-Time Oscilloscopes

Infiniium V-Series Oscilloscopes

Infiniium Z-Series Oscilloscopes

 

Keysights InfiniiVision 1000 X-Series oscilloscopes are engineered to give you quality, industry-proven technology at unbelievably low prices. Now it’s easy to get professional measurements and accessible expertise at your fingertips. Don’t settle for less  and test to impress.

      50 to 100 MHz

     See more signal detail with 50,000 wfms/sec update rate

     Have confidence in your measurements with Keysight-custom technology that leverages more than 60 years of oscilloscope expertise

      Test quickly and easily with a simple, intuitive user interface and built-in help and training signals

     Get professional-level functionality with industry-leading software analysis and 6-in-1 instrument integration

This powerful USB 3.0 super speed oscilloscope combines fast sampling up to 1 GSa/s with high resolutions of 12, 14 and 16 bit and a large memory of 64 Mpoints on all four channels. The oscilloscope supports continuous streaming measurements up to 200 MSa/s and can be synchronized with other oscilloscopes using the CMI interface to form a multi channel combined instrument with synchronized time base. The CMI interface is available by default on the Handyscope HS6 DIFF. Optionally, the Handyscope HS6 DIFF can be delivered with SureConnect connection test and resistance measurement on each channel. Also, the Handyscope HS6 DIFF can be delivered with SafeGround option. With SafeGround you can switch the differential inputs of the Handyscope HS6 DIFF into single ended inputs with ground protection. It allows to make measurements using standard attenuating probes and protects the scope when a short circuit to ground is created.

Key Features & Specifications

Get MORE details

• Fine Resolution capability delivers 320 x 240 pixels but at the cost of a 160 x 120 pixels detector
• 4x digital zoom to magnify and reveal finer details of a faraway object
• Accurately measure objects and clearly distinguish close-fit components from as close as 10 cm 

Capture MORE images

• Evenly distributed and light weight – 746 gms
• Use SD card to expand storage capacity

Perform MORE in-camera measurements and analysis

• In-camera monitoring and analysis capabilities with sensitivity (noise equivalent temperature difference) of 0.07° C
• Quick access buttons to frequently used functions like auto-scaling, trigger, torch and laser pointers.
• Customize camera, trigger or playback settings based on your preference (camera works for you, not the other way round)
• In-camera monitoring to monitor temperature trend over time for quality check or diagnostic purposes (monitor process parameters in industrial plant automation.

Oscilloscopes Oscilloscopes from extreme value to extreme performance:

Whether you need the fastest real-time oscilloscope on earth with the highest measurement accuracy anywhere, the only capacitive touch screen oscilloscopes, or something a little more basic, Keysight oscilloscopes outperform in every category. We are working continually to bring you oscilloscopes with breakthrough capabilities that help you solve your toughest measurement challenges. Like you, we’re working on what’s next.Looking for the best performance and accuracy for the price? Check out the new 6000 X-Series oscilloscope and S-Series oscilloscope U1600 Series Handheld Oscilloscopes InfiniiVision 2000 X-Series DSO and MSO Oscilloscopes InfiniiVision 6000 X-Series DSO and MSO Oscilloscopes InfiniiVision 7000B Series MSO and DSO Oscilloscopes Infiniium 90000A DSO/DSA Series Oscilloscopes Infiniium S-Series Oscilloscopes86100 DCA Wide band Sampling Oscilloscopes Oscilloscope Software USB Modular Oscilloscopes InfiniiVision 3000 X-Series DSO and MSO Oscilloscopes1000 Series Oscilloscopes InfiniiVision 4000 X-Series DSO and MSO Oscilloscopes InfiniiVision 6000 Series MSO and DSO Oscilloscopes6000L Series Rack-Mountable Oscilloscopes Infiniium 9000 Series MSO and DSO Oscilloscopes Infiniium 9000 H-Series High-Definition Oscilloscopes Infiniium 90000 Q-Series Oscilloscopes Infiniium 90000 X-Series Oscilloscopes

High Performance Oscilloscope- Digitizers

DC REGULATED VARIABLE POWER SUPPLY

Indication of voltage / current : 3 1/2 Digital Led Panel Meter

• Output DC Voltage (Regulated ) :0 to 30 Volt Dual

• Max , Rated DC Load current : 5A Dual

• Accuracy D.P.M (DC Volts ) ;+-(0.5% of rdg +2 Digit)

• Accuracy D.P.M (DC Amps) ;+ -/1.5 of rdg + 2digit )

• Input 230V ,50Hz

• Protection : Short Circuit Protection

26.5 GHz Microwave Power Meter MPM26:

Features:

• Measurement in dBm & 22 other units
• X band DRO source for scalar network analysis
• Measures Gunn and Klystron Source outputs.

Choose from an extensive selection of Spectrum Analyzers products from DC to 50 GHz, extendable to 1.1 THz with external mixers, for your spectrum analysis measurements. A signal analyzer combines swept-tuned spectrum analysis to maximize dynamic range for out-of-band distortion and vector signal analysis to accurately measure in-channel distortion. This combination allows for accurately measuring frequency, amplitude, spurious, phase noise and modulation analysis of communication signals without sacrificing dynamic range and speed. your spectrum analyzer or signal analyzer with 89600 VSA software for deep vector signal analysis in R&D or X-Series measurement applications for easy demodulation of a broad range of standard-based and general-purpose digital signals and formats. Upgradable real-time spectrum analyzer capabilities ensure that you see, capture, and understand the most elusive signals - known or unknown. If you are primarily making in-channel measurements, you might be interested in vector signal analyzers, which are optimized for fast measurements of known signals.

Choose from a selection of Vector Signal Analyzer products from 9 kHz to 27 GHz with up to 250 MHz analysis bandwidth for your vector signal analysis measurements. Vector signal analyzers combine superheterodyne technology with high speed ADCs and other DSP technologies to provide fast FFT-based, high-resolution in-channel spectrum measurements, demodulation, and advanced time-domain analysis. A vector signal analyzer is especially useful for characterizing complex burst, transient, or modulated signals in aerospace & defense, radar, wireless communications, and avionics. Combine your vector signal analyzer with X-Series measurement applications or 89600 VSA software to demodulate and characterize a broad range of standard-based and general-purpose digital signals and formats. Extend the capability to out-of-band distortion measurements such as harmonics and spurs with the 89600 VSA software’s spectrum analysis option. For measurements of multi-channel devices or for parallel test, easily combine modular vector signal analyzers to create multi-channel or MIMO solutions. If you need to make both in-band and out-of-band measurements for both known and unknown signals, you might also be interested inspectrum analyzers (signal analyzers).M9393A PXIe Performance Vector Signal Analyzer: 9 kHz to 27 GHzWideband MIMO PXI Vector Signal AnalyzerM9391A PXIe Vector Signal Analyzer: 1 MHz to 3 GHz or 6 GHzN7109A Multi-Channel Signal AnalyzerWideband MIMO PXI Vector Signal Analyzer

Digital Multimeters (DMM)

• Keysight is #1 in Benchtop and System multimeters.
  Why? Because we offer exceptional performance and reliability at a great price.
• 4 to 8½ digits
  
• • Benchtop, System, Modular and Handheld
  
• • Up to 100,000 readings/sec
• See Keysight's next generation Truevolt DMMs 6½ digit DMMs - view interactive demo
• See Keysight's NEW performance Truevolt DMMs:
  6½ digit performance 34465A DMM
  7½ digit performance 34470A DMM  

Power Meters & Power Sensors Keysight power meters operate with sensors of various types (CW, average and peak and average), covering numerous frequency and power ranges to accurately measure the power of RF and microwave signals. Applications include testing the output power of communication base-station transmitters, cellular telephones, radar system equipment, and much more. Waveguide Power Sensors
Keysight's Eband, Vband, and Wband waveguide power sensor models. EPM and EPM-P Series Power Meters
The EPM power meters provide CW and average power measurements. The EPM-P power meters provide peak, average, peak-to-average ratio and time-gated power measurements.
53140 Series Microwave Counter/Power Meter/DVM, up to 46 GHz
The Keysight 53140 Series is a full-featured CW microwave counter, a true power meter, and a dc DVM all in one small convenient package. It is the ideal tool for installation and maintenance of point-to-point microwave links as three of the most commonly made field measurements are combined into one instrument. In ATE systems, the three-in-one 53140 Series will also save valuable rack space.
USB Power Sensors

• U2020 X-Series USB Peak and Average Power Sensors
• U8480 Series USB Thermocouple Power Sensors
• U2000 Series USB Average Power Sensors